Introduction of Filling Pvc Hot Water Bag

The main material of PVC hot water bags is polyvinyl chloride, which is made of resin, an anti-aging agent, and plasticizer as raw materials. Will not cause harm to the human body. The temperature of the PVC hot water bag should not exceed 110 degrees, which may shorten the life of the hot water bag.

Instructions:

The PVC hot water bag will start to soften at a temperature of 80 degrees. If it exceeds 110 degrees, it will start to melt and decompose. Therefore, you should avoid pouring boiling water when using it. You need to lower the water temperature before pouring it in. Although it will not directly cause damage to the PVC hot water bag, But it will affect the service life.

During the processing and production of PVC hot water bags, various compounding agents are added, such as anti-aging agents, vulcanizing agents, softeners, reinforcing agents, fillers, colorants, etc. With the aging of the hot water bag and soaking in hot water, these substances will be precipitated from the rubber, so the water in the hot water bag has an unpleasant taste. Because the water contains impurities and toxic substances, it has a certain stimulating effect on the skin. Therefore, the water in the hot water bottle should not be used to wash your face, especially for children, otherwise, it will cause harm to children's delicate skin.

Zhejiang Lesheros Houseware Co., Ltd. not only has Filling Pvc Hot Water Bag but also Heating Hot Water Bag and other products, welcome to check our official website.